Finding Ways To Keep Up With

Basic Guide to Finding Hidden Valves and Piping

Should you be a homeowner then knowing the details of your home like the back of your hand is something that is very important. One of the things that is especially critical is finding hidden water as well as gas piping and valves and it is important to know where they are especially if you have to deal with things like an emergency. Some of the ways that you can be able to find out where the various shut off valves are located are briefly highlighted below.

There is a high probability that the the gas valves for your home will be located before the gas meter in case you have natural gas. The nub is usually rectangular in shape and uses a wrench but for the most part gas companies usually do not recommend interfering with this valve. A second valve is usually located further down the line or where the gas pipe first enters.

If you have a gas pipe then the valve will most likely be located in the utility room and will be made from flexible copper. When you have such a piping system you are usually sure that the gas system that you have usually has a high pressure. Such gas systems usually have the shutoff valve near the water heater or the furnace.

There is a high chance that water valves usually have two shut off valves since one is located before the meter and the other located after the meter. Cold environments usually have the shut off points located in the house so that they do not freeze. There is a high chance that if you live in milder climates, then the water shutoff valve will be located in an underground box with a lid or next to an exterior wall.

Take time to look at property reports if you are finding it hard to locate water shut off valve since they are usually indicated in property reports given in the last phase of the property purchase. It is important to look keenly at the report since it will show you where the valve is located. There is also a high probability that the picture of what the valve looks like will be drawn so that you are able to know what it looks like.

If you have an automatic sprinkler system then you are going to find that it is hard to locate it since most of them are usually located underground. For such valves using a metal detector may come in handy since they are usually metallic in nature. It is easy for you to be able to know more info. about where to start when you have a plan even though it may not point out the exact location of the valve.